• The index attribute is ignored.
• Mode attributed is supported to specifies in which context the SDL entry should be visible. The
value options are IdleOnly, MidCall, and Always (default).
An example of the syntax is as follows:
[key]
label=label11
target=lpgp@macmcs.madadamian.com
retrieve=YES
subject=my second call subject
mode=MidCall
Roaming profile limitations
Roaming profiles have the following limitations:
• Changes made on the IP Deskphone cannot be uploaded to the Call Server.
• The user cannot edit the downloaded Speed Dial List.
• Profiles are downloaded for the primary user only.
• If a file is downloaded that places a custom key on a key that is already in use as a user’s login
Line key, the Line key takes precedence. The custom key is restored if the user logs off.
• If a file is downloaded that places a custom key on a non-existent key - for example, Key 10 -
and the IP Deskphone does not have an Expansion Module attached, then the key is not
shown. The key appears only when an Expansion Module is attached.
Roaming profiles and service packages
If the IP Deskphone supports roaming profiles that have a service package and that service
package has the network address book enabled, then when the service package arrives, the service
package-enabled network address book replaces the Address Book. The roaming profile and the
network address book are mutually exclusive. To prevent this from happening, disable the network
address book in the user's service package.
Default names
Default names can also be provisioned in the Device Configuration file if per-user files are not
required. Default names are overridden by names specified in the user.cfg file.
• DEFAULT_ADDRESSBOOK_FILE
• DEFAULT_SPEEDDIALLIST_FILE
• DEFAULT_CUSTOMKEYS_FILE
For more information about the Device Configuration file, see
Feature configuration commands on
page 65.
Roaming profiles
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration 205
Comments? infodev@avaya.com
To Next Page
Loading...
