Chapter 37: FNEs and FACs with Avaya
Aura
®
Some Avaya Aura
®
features are invoked by dialing a Communication Manager Feature Name
Extension Extension (FNE) or Feature Access Code (FAC). A speed dial button on the IP
Deskphone can be programmed to an FNE or FAC.
Note:
Most FNEs require first configuring the equivalent FAC.
This enables a feature to be easily accessed by pressing a speed dial key on the IP Deskphone
instead of dialing an entire FNE or FAC code.
For information on configuring a speed dial key on an IP Deskphone, refer to the User Guide for the
specific model of IP Deskphone.
For information on configuring FNEs and FACs in Communication Manager, see Configuring Avaya
1100 Series and 1200 Series IP Deskphones running Release 4.3 SIP software with Avaya Aura
®
Session Manager Release 6.1, Avaya Aura
®
Communication Manager Release 6.0.1, and Avaya
Aura
®
Messaging Release 6.1 - Issue: 1.0, available at
http://avaya.com/support.
Related Links
Avaya Aura
®
support for 1200 Series IP Deskphones on page 368
Supported features on Avaya Aura
®
on page 382
Feature to FAC/FNE Naming on page 384
Feature configuration details on page 385
Supported features on Avaya Aura
®
The following table lists the supported CS 1000 call features with their Avaya Aura
®
equivilent, and
whether they are accessed through an FAC or an FNE.
CS 1000 feature name Avaya Aura
®
feature name Access method
Speed Call/System Speed Call Abbreviated Dialing List1 FAC
Abbreviated Dialing List2 FAC
Abbreviated Dialing List3 FAC
Table continues…
382 SIP Software for Avaya 1200 Series IP Deskphones-Administration March 2015
Comments? infodev@avaya.com
To Next Page
Loading...
