Config option Options or input Description
Failure
Both
Login Notify With Time Checked Configuration values for login
banner with time notification.
Unchecked
Enable Bluetooth (1120E/
1140/1165E only)
Checked Bluetooth is enabled.
Unchecked Bluetooth is disabled.
SSH-SFTP Checked SSH-SFTP is enabled.
Unchecked SSH-SFTP is disabled.
Enable SSH Checked SSH is enabled.
Unchecked SSH is disabled.
UserID Maximum of 11 characters
Password Maximum of 11 characters
Enable SFTP Checked SFTP is enabled.
Unchecked SFTP is disabled.
Enable FIPS Checked FIPS is enabled.
Unchecked FIPS is disabled.
Parameter source precedence rules
The 1100-series SIP IP Deskphones can obtain provisioning information from many sources at
various times. A precedence rule can resolve the possible conflict when different values are
specified in various sources for one parameter. The IP Deskphone considers the obtained
parameters in the following priority, from highest to lowest:
• Manual provisioning
• Automatic provisioning using 802.1ab switch (LLDP)
• Automatic provisioning using DHCP, including Provisioning Info Block data from the Nortel-SIP-
Phone-B or Nortel-SIP-Phone-A DHCP options
• Automatic provisioning using TFTP/HTTP/HTTPS downloaded configuration files
• Last auto received value
• Factory default
Provisioning information from a provisioning source with high priority can overwrite the provisioning
information from a provisioning source with low priority. The manual provisioning has highest
priority. The other provisioning sources are auto-provisioning sources. Automatic provisioning
defines provisioning control for each parameter. You can either manually or automatically provision
each parameter. Each provisioning parameter provides an attribute that specifies if the parameter
was previously provisioned manually or automatically.
Provisioning the IP Deskphone Device Settings
140 SIP Software for Avaya 1200 Series IP Deskphones-Administration March 2015
Comments? infodev@avaya.com
To Next Page
Loading...
