Avaya 1230 - Page 139

Config option Options or input Description
Password Password used by provisioning
server to authenticate the IP
Deskphone. Maximum number of
characters is 99.
PVQMon IP IP address PVQM server IPv4 or IPv6 IP
address.
Note:
Maximum of 1 PVQM server
can be configured.
NAT Traversal NAT Signal
• None
• STUN
NAT method for SIP signaling.
Note:
IPv4 mode only (IPv6
disabled).
NAT Media
• None
• STUN
NAT method for media signaling.
NAT TTL (sec) Value from 0 to 65535.
STUN S1 IP IP address IP address of STUN S1 device.
STUN S2 IP IP address IP address of STUN S2 device.
Media Security Enable SRTP SRTP enabled.
SRTP Mode
• BE-Cap Neg
• BE-2M Lines
• SecureOnly
SRTP configuration values.
Cipher1
• AES_128_SHA1_80
• AES_128_SHA1 32
Preferred order for SRTP cipher
offers.
SIP UDP Port Integer Value from 1024 to 65535.
SIP TCP Port Integer Value from 1024 to 65535.
SIP TLS Port Integer Value from 1024 to 65535.
Connection Timers OS keep-alive
Keep-Alive Integer Value from 5 to 1800.
Register Retry Integer Value from 30 to 1800.
Register Max Retry Integer Value from 600 to 1800.
Login Notify Off Configuration values for login
banner notification.
Success
Table continues…
Manual provisioning parameters
March 2015 SIP Software for Avaya 1200 Series IP Deskphones-Administration 139
Comments? infodev@avaya.com