Avaya 1230 - Page 138

Config option Options or input Description
Force Half Forced half duplex.
Enable Data 802.1Q Checked 802.1Q header and features used.
Unchecked 802.1Q not used.
Data VLAN No VLAN Data VLAN not used.
Enter VLAN ID VLAN ID entered 1 to 4094.
Data Priority bits Auto Use value from the info block or
default of 7.
0 to 7 Force all priority bits to chosen
value.
PC-Port Untag all Checked Removes the 802.1Q header from
a packet before it forwards to the
IP Deskphone PC port.
Unchecked Leave 802.1Q header on packets
destined to the PC port.
Cached IP Checked Last IP Deskphone IP address info
received is used if DHCP server
not reached.
Unchecked Must receive response to assign
IP Deskphone IP address.
Ignore GARP Checked IP Deskphone ignores Gratuitous
ARP requests.
Unchecked IP Deskphone responds to
Gratuitous ARP requests.
Provisioning Server URL Provisioning server IPv4 or IPv6
IP address.
Note:
Maximum of 1 Provisioning
Server IP address can be
configured.
Protocol:
• TFTP
• FTP
• HTTP
• HTTPS
Provisioning protocols.
Note:
If IPv6 is enabled, only FTP
protocol can be used.
Device ID ID used by provisioning server to
authenticate the IP Deskphone.
Enter the User ID as the Device
ID. TFTP does not require Device
ID.
Table continues…
Provisioning the IP Deskphone Device Settings
138 SIP Software for Avaya 1200 Series IP Deskphones-Administration March 2015
Comments? infodev@avaya.com