Figure 101: System Manager New User Profile page
6. In the upper-right corner, click Commit & Continue.
7. Click the Communication Profile tab.
The Communication Profile window opens, as shown in the following figure.
Figure 102: Communication Profile tab
8. In the Communication Profile pane, in the Communication Profile Password field, enter
the password that the user will input to log into the IP Deskphone.
In the Confirm Password field, enter the password again.
9. In the Communication Address pane, click New.
10. Enter the Fully Qualified Address (for example 4655@mycompany.com), and click Add.
11. Scroll down the Communication Profile page to the Session Manager Profile section, as
shown in the following figure.
User provisioning using System Manager 6.3 FP2
410 SIP Software for Avaya 1200 Series IP Deskphones-Administration March 2015
Comments? infodev@avaya.com
To Next Page
Loading...
