Avaya IP Office Basic Edition - Disallowed List Assignment; Disallowed List Assignments

Phone Based Administration Page 106
- Issue 6a (Thursday, February 22, 2018)IP Office Basic Edition
Comments on this document? infodev@avaya.com
6.4 Disallowed List Assignment
Use this feature to assign which disallowed number lists an extension can use.
1408/1416/9504/9508 Phone
1. At either of the first two extensions on the system, press Admin.
· To do the above during a call, you may need to press the PHONE button to display the Admin soft key
option. If you access phone administration during a call, only the SPEAKER, MUTE and HEADSET
buttons still affect the connected call.
2. Use the up or down arrow buttons to scroll the display to System Administration. When highlighted, press
Select.
3. Use the up or down arrow buttons to scroll the display to Restrictions/Permissions. When highlighted,
press Select.
· Alternatively, dial # and the system administration code.
4. Use the up or down arrow buttons to scroll the display to Disallow To. When highlighted, press Select.
5. At the Extension: prompt enter the extension number for which you want to assign lists.
6. At the List Number: prompt enter the list entry you want to change by entering 1 to 8.
7. The current setting is displayed. The default is 2 (not active), ie. the extension is not associated with the selected
list.
· 1 = Active/Assigned.
· 2 = Not Active/Not Assigned (the default setting).
· Alternatively use the left or right arrow icons to toggle through the settings or Default to return to the
default setting.
8. Use the up or down arrow buttons to select another list.
· Exit programming by pressing PHONE. Alternatively use the Back button to move to another menu.
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1. At either of the first two extensions on the system, press Feature **config (ie. Feature **266344).
· If the system has a system password set, it is requested. Enter the password.
2. The phone displays System Admin.
3. Dial #405. The phone displays Disallow To.
4. Enter the number of the extension to be programmed.
5. Enter the list number 1 to 8.
6. Enter the required value. The default is 2 (not active), ie. the extension is not associated with the selected list.
· 1 = Active/Assigned.
· 2 = Not Active/Not Assigned (the default setting).
· Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return
to the default setting.
7. Press the Next Item or Previous Item button for the next or previous list respectively.
· To exit phone based administration at any time, press the Release button. To select a different process use the
Next Procedure or Previous Procedure buttons or dial another feature code.
103
10
114