Phone Based Administration Page 71
- Issue 6a (Thursday, February 22, 2018)IP Office Basic Edition
Comments on this document? infodev@avaya.com
System Changes: System Locale
3.4 System Language
The system language is defaulted to match the system locale . This process can be used to see and change the
language setting if required. The language selection for an individual user can be set separately from that of the
system.
1408/1416/9504/9508 Phone
1. At either of the first two extensions on the system, press Admin.
·
To do the above during a call, you may need to press the PHONE button to display the Admin soft key
option. If you access phone administration during a call, only the SPEAKER, MUTE and HEADSET
buttons still affect the connected call.
2. Use the up or down arrow buttons to scroll the display to System Administration. When highlighted, press
Select.
3. Use the up or down arrow buttons to scroll the display to System Parameters. When highlighted, press
Select.
·
Alternatively, dial # and the system administration code.
4. Use the up or down arrow buttons to scroll the display to Set Language. When highlighted, press Select.
5. The current setting is displayed.
6. Use the up or down arrow buttons to change the setting until the require language is displayed.
·
The possible language options available are: Arabic, Brazilian Portuguese, Canadian French, Cantonese,
Danish, Dutch, English-UK, English-US, Finnish, French, French-Canadian, German, Italian, Korean,
Mandarin, Norwegian, Portuguese, Russian, Spanish, Spanish (Latin) and Swedish.
7. Press Select to use the currently displayed language.
8. The phone will prompt for an Immediate Reboot ?. Press Confirm to reboot the system and use the new locale
setting.
·
Exit programming by pressing PHONE. Alternatively use the Back button to move to another menu.
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1. At either of the first two extensions on the system, press Feature **config (ie. Feature **266344).
·
If the system has a system password set, it is requested. Enter the password.
2. The phone displays System Admin.
3. Use the Next Process key to select Set Language.
4. Use the Next Data or Previous Data buttons to change the setting.
·
The possible language options available are: Arabic, Brazilian Portuguese, Canadian French, Cantonese,
Danish, Dutch, English-UK, English-US, Finnish, French, French-Canadian, German, Italian, Korean,
Mandarin, Norwegian, Portuguese, Russian, Spanish, Spanish (Latin) and Swedish.
5. Press Enter to use the currently displayed language.
·
To exit phone based administration at any time, press the Release button. To select a different process use the
Next Procedure or Previous Procedure buttons or dial another feature code.
69
150
10
114
To Next Page
Loading...
Need help?
General