Avaya IP Office Basic Edition - Display Language

Phone Based Administration Page 150
- Issue 6a (Thursday, February 22, 2018)IP Office Basic Edition
Comments on this document? infodev@avaya.com
10.3 Display Language
Use this feature to change the language used for messages that appear on telephone display. The language is set for
each extension, so telephones in the same system can display different languages.
· If the system locale or system language settings are changed, any user language settings are reset to
match the new default language.
1408/1416/9504/9508 Phone
1. At either of the first two extensions on the system, press Admin.
· To do the above during a call, you may need to press the PHONE button to display the Admin soft key
option. If you access phone administration during a call, only the SPEAKER, MUTE and HEADSET
buttons still affect the connected call.
2. Use the up or down arrow buttons to scroll the display to System Administration. When highlighted, press
Select.
3. Use the up or down arrow buttons to scroll the display to Extensions. When highlighted, press Select.
4. Use the up or down arrow buttons to scroll the display to Display Language. When highlighted, press
Select.
5. At the Extension: prompt enter the extension you want to edit.
6. The current setting is displayed.
· The possible language options available are: Arabic, Brazilian Portuguese, Canadian French, Cantonese,
Danish, Dutch, English-UK, English-US, Finnish, French, French-Canadian, German, Italian, Korean,
Mandarin, Norwegian, Portuguese, Russian, Spanish, Spanish (Latin) and Swedish.
· Alternatively use the left or right arrow icons to toggle through the settings or Default to return to the
default setting.
8. Use the up or down arrow buttons to select another extension to adjust if required.
· Exit programming by pressing PHONE. Alternatively use the Back button to move to another menu.
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1. At either of the first two extensions on the system, press Feature **config (ie. Feature **266344).
· If the system has a system password set, it is requested. Enter the password.
2. The phone displays System Admin.
3. Dial #303. The phone displays Display Language.
4. At the Extension: prompt enter the extension number that you want to set the language for. The current display
language is shown.
5. Use the Next Data or Previous Data buttons to change the setting. Press Remove to return to the default for
the system (this will vary depending on the system locale setting ).
· The possible language options available are: Arabic, Brazilian Portuguese, Canadian French, Cantonese,
Danish, Dutch, English-UK, English-US, Finnish, French, French-Canadian, German, Italian, Korean,
Mandarin, Norwegian, Portuguese, Russian, Spanish, Spanish (Latin) and Swedish.
· Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return
to the default setting.
· To exit phone based administration at any time, press the Release button. To select a different process use the
Next Procedure or Previous Procedure buttons or dial another feature code.
69 71
114
69