Phone Based Administration Page 69
- Issue 6a (Thursday, February 22, 2018)IP Office Basic Edition
Comments on this document? infodev@avaya.com
System Changes: System Numbering
3.3 System Locale
The system locale setting affects a range of trunk settings relating to ring tones and other signals. Wherever possible the
locale should be set to match the actual location of the system.
·
! WARNING
This process will restart the phone system and disconnect all currently connected calls.
·
Changing the system locale will change the system language to the default for the selected locale. Any user
display language settings are also reset to match the system language.
1408/1416/9504/9508 Phone
1. At either of the first two extensions on the system, press Admin.
·
To do the above during a call, you may need to press the PHONE button to display the Admin soft key
option. If you access phone administration during a call, only the SPEAKER, MUTE and HEADSET
buttons still affect the connected call.
2. Use the up or down arrow buttons to scroll the display to System Administration. When highlighted, press
Select.
3. Use the up or down arrow buttons to scroll the display to System Parameters. When highlighted, press
Select.
·
Alternatively, dial # and the system administration code.
4. Use the up or down arrow buttons to scroll the display to Set Locale. When highlighted, press Select.
5. Use the up or down arrow buttons to change the setting until the require locale is displayed.
·
The possible locales are: Argentina, Australia, Bahrain, Belgium, Brazil, Canada, Chile, China,
Colombia, Denmark, Egypt, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, India,
Italy, Korea, Kuwait, Mexico, Morocco, Netherlands, New Zealand, Norway, Oman, Pakistan, Peru,
Poland, Portugal, Qatar, Russia, Saudi Arabia, Singapore, South Africa, Spain, Sweden,
Switzerland, Taiwan, Turkey, United Arab Emirates, United Kingdom, United States and Venezuela.
6. Press Select to use the currently displayed locale.
7. The phone will prompt for an Immediate Reboot ?. Press Confirm to reboot the system and use the new locale
setting.
·
Exit programming by pressing PHONE. Alternatively use the Back button to move to another menu.
M7324/M7324N/M7310/M7310N/T7316/T7316E Phone
1. At either of the first two extensions on the system, press Feature **config (ie. Feature **266344).
·
If the system has a system password set, it is requested. Enter the password.
2. The phone displays System Admin.
3. Use the Next Process key to select Set Locale.
4. Use the Next Data or Previous Data buttons to change the setting.
·
The possible locales are: Argentina, Australia, Bahrain, Belgium, Brazil, Canada, Chile, China,
Colombia, Denmark, Egypt, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, India,
Italy, Korea, Kuwait, Mexico, Morocco, Netherlands, New Zealand, Norway, Oman, Pakistan, Peru,
Poland, Portugal, Qatar, Russia, Saudi Arabia, Singapore, South Africa, Spain, Sweden,
Switzerland, Taiwan, Turkey, United Arab Emirates, United Kingdom, United States and Venezuela.
5. Press Enter to use the currently displayed locale.
6. The phone will prompt for an Immediate Reboot ?. Press Enter to reboot the system and use the new locale
setting.
·
To exit phone based administration at any time, press the Release button. To select a different process use the
Next Procedure or Previous Procedure buttons or dial another feature code.
71
150
10
114
To Next Page
Loading...
