Avaya IP Office Basic Edition

To Next Page

To Previous Page

Phone Based Administration Page 115

- Issue 6a (Thursday, February 22, 2018)IP Office Basic Edition

Comments on this document? infodev@avaya.com

Dialing Restrictions and Permissions: System Password

6.9 Toll Call Prefix

Use this feature to indicate whether users must dial a 0 (for operator assisted calls) or 1 (for direct-dial calls) before the

area code to make a long distance call or just the area code and number.

1408/1416/9504/9508 Phone

1. At either of the first two extensions on the system, press Admin.

To do the above during a call, you may need to press the PHONE button to display the Admin soft key

option. If you access phone administration during a call, only the SPEAKER, MUTE and HEADSET

buttons still affect the connected call.

2. Use the up or down arrow buttons to scroll the display to System Administration. When highlighted, press

Select.

3. Use the up or down arrow buttons to scroll the display to Restrictions/Permissions. When highlighted,

press Select.

Alternatively, dial # and the system administration code.

4. Use the up or down arrow buttons to scroll the display to Toll Call Prefix. When highlighted, press Select.

5. The current setting is displayed.

6. Enter 1 or 2.

1 = 0 or 1 required before Area Code and Number (the default setting).

2 = Area Code and Number Only.

Alternatively use the left or right arrow icons to toggle through the settings or Default to return to the

default setting.

Exit programming by pressing PHONE. Alternatively use the Back button to move to another menu.

M7324/M7324N/M7310/M7310N/T7316/T7316E Phone

1. At either of the first two extensions on the system, press Feature **config (ie. Feature **266344).

If the system has a system password set, it is requested. Enter the password.

2. The phone displays System Admin.

3. Dial #402. The phone displays Toll Call Prefix.

4. The current system setting is displayed.

5. To change the setting, enter the required value:

1 = 0 or 1 required before Area Code and Number (the default setting).

2 = Area Code and Number Only.

Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return

to the default setting.

6. Press the Next Item or Previous Item button for the next or previous extension respectively.

To exit phone based administration at any time, press the Release button. To select a different process use the

Next Procedure or Previous Procedure buttons or dial another feature code.

114

Avaya IP Office Basic Edition - Toll Call Prefix