Phone Based Administration Page 116
- Issue 6a (Thursday, February 22, 2018)IP Office Basic Edition
Comments on this document? infodev@avaya.com
ETR 18D/ETR 34D Phone
1. At either or the first two extensions on the system, press Feature 0 0 followed by two presses of the first
intercom or call appearance button.
2. System Administration: is shown on the display.
3. Dial #402. The phone displays Toll Call Prefix.
4. The current system setting is displayed.
5. To change the setting, enter the required value:
·
1 = 0 or 1 required before Area Code and Number (the default setting).
·
2 = Area Code and Number Only.
·
Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return
to the default setting.
6. Press the Next Item or Previous Item button for the next or previous extension respectively.
·
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then
placing it back in the cradle.
To Next Page
Loading...
