Phone Based Administration Page 299
- Issue 6a (Thursday, February 22, 2018)IP Office Basic Edition
Comments on this document? infodev@avaya.com
System Maintenance: Remote Administration Password
ETR 18D/ETR 34D Phone
1. At either or the first two extensions on the system, press Feature 0 0 followed by two presses of the first
intercom or call appearance button.
2. System Administration: is shown on the display.
3. Dial #730.
4. If a system password has been set, the prompt Enter Sys Password: is displayed. Enter the four digit
system password.
5. The current remote administration password is displayed or dashes if no password has been set. Enter or change
the password.
·
Enter a character by pressing the indicated button until that character is displayed. If you pause more than 1
second after press a button, the cursor will move onto the next space.
·
Do not use punctuation characters such as #, ?, /, -, _ and , in the password. Note that the password is case
sensitive and must be unique.
2. To save the password, press Enter . The bottom line of the display shows the password as it has been
entered.
·
Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then
placing it back in the cradle.
114
22
To Next Page
Loading...
