Phone Based Administration Page 90
- Issue 6a (Thursday, February 22, 2018)IP Office Basic Edition
Comments on this document? infodev@avaya.com
4. Enter the required value. The default is 2 (not active), ie. use supervised disconnection.
·
1 = Active/Assigned.
·
2 = Not Active/Not Assigned (the default setting).
·
Alternatively use the Next Data or Previous Data buttons to change the setting or press Remove to return
to the default setting.
5. The change requires the system to be rebooted. At the Immed Reboot? prompt, press Enter to reboot or
Remove to cancel.
22
To Next Page
Loading...
