Avaya JEM24 Installing

Parameter Retained
LANG0STAT Y
MSGNUM N
PROCSTAT Y
PROCPSWD Y
PHY1STAT Y
PHY2STAT Y
PHNCC N
PHNDPLENGTH N
PHNIC N
PHNLDLENGTH N
PHNLD N
PHNLAC Y
PHNOL N
RFSNAME N
SNMPADD Y
SNMPSTRING Y
SIG Y
SCREENSAVERON N
TEAM_BUTTON_RING_T YPE Y
TPSLIST N
VLANTEST Y
Related links
File Server configuration on page 97
Modifying the Settings file
About this task
Use this procedure to modify the Settings file to provision the phone configuration parameters.
The parameter values stored for the users of a particular phone model do not apply to other phone
models, even if the corresponding SIP user is the same.
Note:
This procedure applies to Avaya Aura
®
environment only. In IP Office, the settings file is
autogenerated and cannot be modified.
Procedure
1. On the file server, go to the directory of the Settings file.
2. Open the Settings file in a text editor.
Server configuration
December 2018 Installing and Administering Avaya J100 Series IP Phones 103
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English