Avaya JEM24 Installing

To override call redirection, you must configure the monitored phone on Avaya Aura
®
System
Manager.
For more information about setting the overriding permission, see Administering Avaya Aura
®
System Manager.
Team Button configuration
This feature must be activated on the Avaya Aura
®
Communication Manager.
Use the 46xxsettings file to set the following parameters:
Parameter name Default Value Description
TEAM_BUTTON_REDIRECT_IN
DICATION
0 Specifies if the redirection
indication must be shown on a
team button on the monitored
station, if it is not a redirect
destination of the monitored
station.
Value Operation:
• 0: Disabled. The redirect
indication is shown only on a
monitoring station which is
redirection destination.
• 1: Enabled. The redirection
indication is displayed on all
monitoring stations.
Note:
Avaya J139 IP Phone does
not support this feature.
TEAM_BUTTON_RING_TYPE 1 Specifies the alerting pattern to
use for team buttons.
Valid values are 1 through 8. The
default value is 1.
Note:
Avaya J139 IP Phone does
not support Team Button
feature.
Team Button
December 2018 Installing and Administering Avaya J100 Series IP Phones 171
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English