Name Description
For IP Office, you must use the following:
•
reg
• message-summary, which is identical to mwi
• avaya-ccs-profile, which is identical to ccs
For the third-part call control setup, you can use message-summary.
Voice Mail Access Code Specifies the number to access the voice mail in a non-Avaya environment.
100rel Specifies whether the 100rel option tag is included in the SIP INVITE
header field.
The options are:
• Disable: The tag is not included.
• Enable (default): The tag is included.
Validate Incoming
messages
Specifies whether AOR received in Request-URI of an incoming call must
be validated with the contact header published by phone during
registration.
The options are:
• Disable (default)
• Enable
‘Privacy’ header in
Incoming message
Specifies whether AOR received in Request-URI of an incoming call must
be private in the contact header published by the phone during registration.
The options are:
• Display CallerID information (default)
• Display ‘Restricted’
Related links
Configuring SIP settings on page 57
Configuring Settings
About this task
Avaya J100 Series IP Phones display the details of the configuration fields in the Description
section.
Procedure
1. Log in to the web interface as an administrator.
2. In the navigation pane, click Settings.
Configuring the phone using web interface
December 2018 Installing and Administering Avaya J100 Series IP Phones 66
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General
