Avaya JEM24 Installing

3. Attach the Avaya J100 Expansion Module to the wall mount bracket by inserting the upper
tab of the wall mount bracket into the slot on the back of the expansion module.
4. Attach the phone to the wall mount bracket. See Wall mounting Avaya J100 Series IP
Phones on page 28 for more details.
Related links
Wall mounting Avaya J100 Series IP Phones on page 28
Software installation
Phone installation process
You can install Avaya J100 Series IP Phones in the following ways:
• With the Device Enrollment Server (DES) discovery process: The installation process begins
after the phone is connected to a network. This is an automated process.
• Without the DES discovery process: The installation process includes a series of pre-
configuration tasks.
Phone installation with DES
DES server
Device Enrollment Service (DES) is an Avaya cloud service used to automate the deployment of
phones, especially during initial deployment. DES exposes interfaces to allow different entities to
interact with the service.
Software installation
December 2018 Installing and Administering Avaya J100 Series IP Phones 31
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English