Name Description
HTTP Listen Port Specifies the port number of the web server when
the web interface is accessed using HTTP.
The valid value is an integer from 80 to 65535. The
default port number is 80.
HTTPS Listen Port Specifies the port number of the web server when
the web interface is accessed using HTTPS.
The valid value range is from 443 to 65535. The
default port number is 443.
The valid value is an integer from 443 to 65535.
Use certificate for Web Server Specifies which server certificate will be used when
the web interface is accessed using HTTPS.
The options are:
• Factory Certificate (default)
• Custom Certificate
Related links
Configuring network settings on page 43
Configuring Ethernet settings
About this task
Avaya J100 Series IP Phones display the details of the configuration fields in the Description
section.
Procedure
1. Log in to the web interface as an administrator.
2. In the navigation pane, click Ethernet.
3. Configure the following areas:
• IP Configuration
• IPv4 Configuration
• IPv6 Configuration
• 802.1X Supplicant Operating Mode
• VLAN
• QoS
• LLDP
Configuring the phone using web interface
December 2018 Installing and Administering Avaya J100 Series IP Phones 46
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General
