Avaya JEM24 Installing

Standard J129 J139 J169 J179 JBM24 JEM24
Softkeys call
control
3 4 4 4 N/A two paging
buttons
Wired Handset Yes Yes Yes Yes N/A N/A
Amplified
Handset mode
Yes, with
20dB of gain
Yes, with
20dB of gain
Yes, with
20dB of gain
Yes, with
20dB of gain
N/A N/A
Wired Headset No Yes Yes Yes N/A N/A
Expansion
module capable
No No Yes (3) Yes (3) N/A N/A
Optional DC
Power
No Yes Yes Yes N/A N/A
GSPPoE power
adapter
Yes Yes Yes Yes N/A N/A
Power specifications
Avaya J100 Series IP Phones can be powered using Power over Ethernet (PoE) or 5V DC
adapter. You must purchase the power adapter separately.
Avaya J100 Series IP Phones are ENERGY STAR
®
compliant.
Important:
• J129 and J179 phones support Wi-Fi module.
• J139 is a single-class phone and does not support peripherals.
• J169 and J179 phones support JBM24 and JEM24 button modules. You can connect a
maximum of three button modules of the same model simultaneously.
Note:
The simultaneous connection of different button module types is not supported.
• For J169 and J179 phones, use power adapter when you connect more than two button
modules.
• If you are using the power adapter, disable PoE on the Ethernet connection.
The following table provides the power measurement of the phones, adjuncts, and peripherals.
Phone model Avaya standard power measurements (in Watts) Energy Star values
(in Watts)
Conservation Typical Maximum Stand by
J129 2.20 2.73 3.45 1.04
J139 1.40 1.67 2.24 1.55
Table continues…
Avaya J100 Series IP Phones overview
December 2018 Installing and Administering Avaya J100 Series IP Phones 14
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English