Whisper Page
The Whisper Page feature to make an announcement to a person who is active on a call with the
other members having same extension. Only the person who is paged can hear the
announcement.
This feature must be activated on the Avaya Aura
®
Communication Manager.
Exclusion
The Exclusion feature is used to prevent other multi-appearance users to bridge on to the same
extension for an existing call.
You must activate this feature on the Avaya Aura
®
Communication Manager.
Send All Calls
The Send All Calls (SAC) feature is used to redirect incoming calls to a predefined coverage
number. You must set a number so that all incoming calls rings once at the user’s extension and
then redirects to your assigned number.
This feature must be activated on the Avaya Aura
®
Communication Manager.
Extension to Cellular
With the Extension to Cellular (EC500) feature, you can do the following:
• Receive an incoming call of your Avaya phone on your personal phone by using EC500
button when you are away from your desk.
• Extend an ongoing call to your cell phone by using Extend Call button. When you answer the
extended call on your cell phone, the call remains active on your office phone. Later you can
switch back to your office phone to continue the call.
You must activate this feature by using Avaya Aura
®
Communication Manager.
Limit Number of Concurrent Calls
The Limit Number of Concurrent Calls (LNCC) feature is used to control the number of concurrent
incoming calls, and to change Multiple Call Appearance phone to a Single Call Appearance
Feature configuration
December 2018 Installing and Administering Avaya J100 Series IP Phones 172
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General
