Avaya JEM24 Installing

Voicemail configuration
Use the 46xxsettings.txt file to set the following parameters:
Parameter name Default value Description
SOFTKEY_CONFIGURATION 0,1,2 Specifies which feature will show
up on which softkey on the Avaya
J100 Series IP Phones screens.
The features are defined as
follows:
• 0 = Redial
• 1 = Contacts
• 2 = Emergency
• 3 = Recents
• 4 = Voicemail
Note:
Emergency calls are not
supported in the 3PCC
environment.
Note:
Malicious call tracing
With the Malicious Call Tracing feature, the end user can track a malicious or threatening call.
Activating Malicious Call Tracing (MCT Act) alerts a controller to begin call tracing and provide
information for reporting this call. The administrator must set up the phone system to trace and
track malicious calls and there should be an attendant or controlling user to oversee the trace.
This feature must be activated on the Avaya Aura
®
Communication Manager.
Calling party number blocking
With the Calling Party Number (CPN) Block feature the end user can prevent his number from
displaying. The system administrator must activate this feature and override the default system
setting to display the extension on outgoing calls.
This feature must be activated on the Avaya Aura
®
Communication Manager.
Malicious call tracing
December 2018 Installing and Administering Avaya J100 Series IP Phones 175
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English