Name Description
Note:
Restart the phone for new parameters from the
settings file to take effect.
Export Configuration File Enable user to export a configuration file. To export
the configuration file, click Export .
Firmware
Software Version Displays the version of the SIP software.
The default value is empty.
Backup Software Version Displays the backup software version.
The default value is empty.
Firmware Upgrade Enables the user to import the firmware upgrade file
from a local PC or any PC connected to the
network.
To upload the firmware upgrade file, click Browse
to browse your PC, select the file and click
Upgrade.
The phone reboots after you select Yes in the
prompt.
Backup/Restore User Data
User store Address for Backup/Restore Specifies the IP address or the DNS name used for
HTTP(S) data backup and retrieval.
The valid value starts with http:// or https://
and contains either an IP address or a DNS name
without any intervening spaces. The maximal value
length is 255 characters.
Related links
Configuring management settings on page 80
Changing the password of the web interface and the
phone admin
About this task
Use this procedure to change the administrator password for the phone Administration menu and
the web interface.
Your administration password must be between 8 to 31 alphanumeric characters including upper,
lower, and special characters. Your password must contain at least 2 digits. You can use special
characters such as: tilde (~), exclamation mark (!), at (@), pound (#), dollar ($), percent (%), carat
Changing the password of the web interface and the phone admin
December 2018 Installing and Administering Avaya J100 Series IP Phones 83
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General
