Parameter name Default value Description
SOFTKEY_CONFIGURATION 0,1, and 2 Specifies which feature shows up
on which soft key on the Avaya
J129 IP Phone screen.
The options are:
• 0 = Redial
• 1 = Contacts
• 2 = Emergency
• 3 = Recents
• 4 = Voicemail
Note:
Emergency calls are not
supported in the 3PCC
environment.
Presence
With the Presence feature, an end user can view the status of contacts in real time. End user can
also change his own presence status according to his availability.
Configuring Presence by using the web interface
About this task
Use this procedure to enable or disable complete presence options.
Procedure
1. Log in to the web interface as an administrator.
2. In the navigation pane, click Settings.
3. Click Feature access.
4. In the Presence field, click one of the following option:
• Allow: To enable the presence options.
• Do not allow: To disable the presence options.
Presence configuration
You must activate this feature on Avaya Aura
®
Communication Manager.
Feature configuration
December 2018 Installing and Administering Avaya J100 Series IP Phones 160
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General
