Avaya JEM24 Installing

Setting Description Associated Configuration
Parameter
Group The group identifier to download
during start-up a specific
configuration set for a dedicated
user group.
GROUP
MAC The MAC address of the phone. MACADDR
Serial number The serial number of the phone.
SIP Proxy Server The SIP proxy server to which the
phone registered successfully.
SIPPROXYSRVR_IN_ USE
Presence Server
The setting is only available in an
Avaya Aura
®
environment.
The IP address of the presence
server.
HTTPS Server The list of IP or DNS addresses
of TLS servers for HTTPS file
download, settings file or
language files, during startup
procedure.
TLSSRVR
HTTP Server The IP address of the HTTP
server that the phone accessed
before successfully.
HTTPSRVR_IN_USE
DNS Server The IP address of the DNS server
that the phone accessed before
successfully.
DNSSRVR_IN_USE
SW version The version of the software.
Protocol Signaling protocol in effect, such
as SIP.
Setting the 802.1x operational mode
Before you begin
Set the following parameters:
• DOT1X: To support 802.1X Pass-thru operation, set the parameter to zero or one.
• DOT1XSTAT: To support supplicant operation, set the parameter to one or two.
Procedure
1. Press Main Menu > Administration.
2. In the Access code field, enter the admin menu password.
3. Press Enter.
4. Select 802.1X.
Phone administration and configuration
December 2018 Installing and Administering Avaya J100 Series IP Phones 156
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English