Enhanced Call Forward
Enhanced Call Forward feature is used to set rules on call forwarding. The rules can be set by
entering the internal and external phone numbers in the corresponding call forward types.
Configuring Call Forwarding on the phone web interface
About this task
Use this procedure to enable or disable the Call Forwarding feature through the web interface of
the phone.
Procedure
1. Log in to the web interface.
2. In the navigation pane, go to Settings.
3. Select Feature access.
4. In the Call Forward field, click one of the following:
• Allow: To enable the call forward option.
• Do not allow: To disable the call forward option.
Call Forwarding configuration
You must activate this feature on Avaya Aura
®
Communication Manager.
Use the 46xxsettings.txt file to set the following parameters:
Parameter name
Default value Description
CALLFWDADDR — Sets the address to which the
calls are forwarded.
Users can change or replace this
administered value if
CALLFWDSTAT is not 0.
Note:
This parameter is supported
when failed over from Aura
SM to a non-Aura survivable
server, excluding BSM.
CALLFWDDELAY — Sets the number of ring cycles
before the call is forwarded to the
forward or coverage address. The
default delay is one ring cycle.
Table continues…
Feature configuration
December 2018 Installing and Administering Avaya J100 Series IP Phones 168
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General
