Avaya JEM24 Installing

2. In the Access code field, enter the administration password.
The default access code is 27238.
3. Press Enter.
Accessing the Ethernet IPv4 settings
Procedure
1. Navigate to Main Menu > Administration.
2. In the Access code field, enter the administration password.
The default access code is 27238.
3. Press Enter.
4. Select IP Configuration > Ethernet IPv4.
The phone displays the parameters for IP configuration.
IP configuration field description
Configuration Parameter Name
Description
The following parameters are available in Ethernet IPv4 menu:
Use DHCP Specifies the access to view or manually enter the
IP address.
Select one of the following:
• YES: Selects the DHCP option to view the IP
addresses.
• No: Selects the DHCP option to enter the IP
addresss.
Phone Specifies the IP address of the phone. The
available format is nnn.nnn.nnn.nnn.
Gateway Specifies the gateway of the phone. The available
format is nnn.nnn.nnn.nnn.
Mask Specifies the network mask. The available format is
nnn.nnn.nnn.nnn.
The following parameters are available in VLAN menu:
802.1Q Choose one of the following options:
• Auto: Automatic mode.
• On: Turns on the configuration.
Table continues…
Phone administration and configuration
December 2018 Installing and Administering Avaya J100 Series IP Phones 146
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English