Avaya JEM24 Installing

Procedure
1. Press Main Menu > Administration.
2. In the Access code field, enter the administation menu password.
3. Press Enter.
4. Select SSON.
5. In the SSON field, enter the new SSON.
The number must be between 128 to 254.
6. Press Save.
Caution:
Do not perform this procedure if you are using static addressing. Perform this
procedure if you are using DHCP addressing and the DHCP option number is changed
from the default number.
Using the VIEW administrative option
About this task
Use this procedure to view the parameters associated with the admin procedures.
Procedure
1. Press Main Menu > Administration.
2. In the Access code field, enter the admin menu password.
3. Press Enter.
4. Select View.
5. Press Back to return to the main menu.
VIEW field description
Setting
Description Associated Configuration
Parameter
Model The model of the phone that is
set by factory procedures.
MODEL
Backup SW version The version of the software
backup.
Gateway The address of the gateway.
Table continues…
Using the VIEW administrative option
December 2018 Installing and Administering Avaya J100 Series IP Phones 155
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English