Configuring Wi-Fi settings
About this task
Avaya J100 Series IP Phones display the details of the configuration fields in the Description
section.
Procedure
1. Log in to the web interface as an administrator.
2. In the navigation pane, click Wi-Fi.
3. Configure the following areas:
• WiFi Control
• WiFi Setting
• IP Configuration
• WEP
• WPA2 Enterprise (802.1x)
• QoS
4. Click one of the following:
• Save: To save the configuration changes.
• Reset to Default: To revert to the default values.
Related links
Wi-Fi settings field descriptions on page 52
Wi-Fi settings field descriptions
Name
Description
WiFi Control
WLAN Network Configuration Mode Specifies the Wi-Fi network configuration mode.
The options are:
• Automatic (default)
• Manual
WiFi Setting
Country Specifies the country code to define the Wi-Fi radio parameters
permitted by the local regulatory domain.
Value format: two-character country code. The default value is
US.
Table continues…
Configuring the phone using web interface
December 2018 Installing and Administering Avaya J100 Series IP Phones 52
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General
