Avaya JEM24 Installing

Configuration Parameter Name Description
• Off: Turns off the configuration.
VLAN ID Specifies the ID for VLAN. The available format is
dddd.
VLAN Test Specifies the time in seconds, the phone waits for
the DHCP server response. The available format is
ddd.
The following parameters are available in Servers menu:
HTTP server Specifies the IP address of the HTTP file server.
The available format is nnn.nnn.nnn.nnn.
HTTPS server Specifies the IP address of the HTTPS file server.
The available format is nnn.nnn.nnn.nnn.
DNS server Specifies the IP address of the DNS server. The
available format is nnn.nnn.nnn.nnn.
SNTP server Specifies the time server settings.
The following parameters are available in Auto provisioning menu:
Service Specifies option for auto provisioning. Press Toggle
to choose the required option :
• Inactive
• Active
Certificate Specifies if the certificate is available.
Certificate Expiry Specifies the expiry date of the certificate. The
available format is DD-MMM-YYYY
Using the debug mode
About this task
Use this procedure to activate or deactivate the debugging options.
Before you begin
You must set a HTTP server in the BRURI parameter in the Settings file that is capable of
receiving a phone report from the phone. BRURI parameters can receive only phone report. It has
no effect on any other debugging setting.
Procedure
1. Press Main Menu > Administration.
2. In the Access code field, enter the admin menu password.
3. Press Enter.
4. Select Debug.
Using the debug mode
December 2018 Installing and Administering Avaya J100 Series IP Phones 147
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English