Avaya JEM24 Installing

J169 1.72 1.84 2.34 1.85
J179 1.74 2.10 2.71 1.85
JBM24 0.19 0.69 1.35 NA
JEM24 1.70 1.90 2.00 NA
BT/Wi-Fi module NA NA 0.90 NA
BT only NA NA 0.10 NA
The power requirements of the phone vary depending on the connected peripherals. The following
table provides the correlation between the connected peripherals and power requirements.
Phone model PoE Class
J129 • IEEE 802.3af PoE Class 1 without any peripheral.
• IEEE 802.3af PoE Class 2 with a Wi-Fi module.
J139 • IEEE 802.3af PoE, Class 1 device.
J169 • IEEE 802.3af PoE Class1 without button module.
• IEEE 802.3af PoE Class 2 for up to two button
modules.
• 5V DC adapter for three button modules.
J179 • IEEE 802.3af PoE Class1 without Wi-Fi module or
button module.
• IEEE 802.3af PoE Class 2 for up to two button
modules.
• 5V DC adapter for three button modules.
Note:
Use 5V DC adapter if you simultaneously
connect a Wi-Fi module along with one or
more button modules.
Supported codecs
Avaya J100 Series IP Phones supports the following codecs and call control protocol:
Codecs
J129 J139 J169 J179
Call control
protocol
SIP SIP SIP SIP
Codecs • G.711a
• G.711µ
• G.729
• G.711a
• G.711µ
• G.729
• G.711a
• G.711µ
• G.729
• G.711a
• G.711µ
• G.729
Table continues…
Supported codecs
December 2018 Installing and Administering Avaya J100 Series IP Phones 15
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English