• DST Stop: Specifies when to stop the offset for daylight saving time. The value format
must be either odddmmmht or Dmmmht, where:
- o represents a one-character ordinal adjective. For example, 1 for first, 2 for second,
3 for third, 4 for fourth, or L for last.
- D represents 1 or 2 ASCII digits or characters representing the date of the month.
- ddd represents three characters containing the English abbreviation for the day of the
week. For example, Sun for Sunday, Mon for Monday, etc.
- mmm represents a three-character English abbreviation for the month. For example,
Jan for January, Feb for February, etc.
- h represents a one-numeric digit representing the time to make the adjustment at
hAM (0h00 in military format).
The valid values of h are from 0 to 9.
- t represents one character for the time zone to which the changes are applied. For
example, “L” for local time or “U” for Universal Time.
5. Click one of the following :
• Save: To save the configuration changes.
• Reset to Default: To revert to the default values.
Configuring management settings
About this task
Avaya J100 Series IP Phones display the details of the configuration fields in the Description
section.
Procedure
1. Log in to the web interface as an administrator.
2. In the navigation pane, click Management.
3. Configure the following areas:
• Device Enrollment Server
• HTTP Provisioning Server
• HTTPS Provisioning Server
• Configuration
• Firmware
• Backup/Restore User Data
Configuring the phone using web interface
December 2018 Installing and Administering Avaya J100 Series IP Phones 80
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General
