4. Click one of the following:
• Save: To save the configuration changes.
• Reset to Default: To revert to the default values.
Related links
Management settings field descriptions on page 81
Management settings field descriptions
Name Description
Device Enrollment Service
DES Discovery Specifies the DES Discovery mode.
The options are:
• Enable (default)
• Disable
• Disable and Restored with Reset to Default
Embedded Public Certificates Specifies whether to trust the embedded public
certificates.
The options are:
• Trusted only if Trustcerts is empty (default)
• Always Trusted
HTTP Provisioning Server
HTTP Server Address Specifies the IP address of the of the provisioning
file server.
The valid value is the IP address in the dotted
decimal name format, DNS name format or colon-
hex.
The default value is “0.0.0.0”.
HTTP Server Directory Path Specifies the path all configurations and data files
the device might request when starting up. This
path is relative to the root of the HTTP file server, to
the directory in which the device configuration and
date files are stored.
The valid value is a sting of up to 127 ASCII
characters without spaces. The default value is
empty.
HTTP Port Specifies the HTTP port address.
Table continues…
Configuring management settings
December 2018 Installing and Administering Avaya J100 Series IP Phones 81
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General
