Avaya JEM24 Installing

Parameter name Default value Description
PHY2TAGS is configured through the Settings
file.
L2QVLAN 0 Specifies the voice VLAN ID to be used by IP
phones.
Valid values are 0 through 4094.
L2QVLAN is configured through:
• Local admin procedure
• A name equal to value pair in DHCPACK
message
• SET command in the Settings file
• DHCP option 43
• LLDP
PHY2VLAN 0 Specifies the value of the 802.1Q VLAN ID that
is used to identify network traffic going into and
coming out of the internal CPU of the phone.
Valid values are 0 through 4094.
PHY2VLAN is configured through:
• SET command in the Settings file
• LLDP
L2QAUD 6 Specifies the value of the VLAN priority portion of
the VLAN tag when the phone generates tagged
Ethernet frames from the internal CPU of the
phone. These values are inserted into the VLAN
tag for audio frames (RTP, RTCP, SRTP,
SRTCP). All other frames except those specified
by the L2QSIG parameter are set to priority 0.
Valid values are 0 through 7.
L2QAUD is configured through:
• SET command in the Settings file
• LLDP
L2QSIG 6 Specifies the value of the VLAN priority portion of
the VLAN tag when the phone generates tagged
Ethernet frames from the internal CPU of the
phone. These values are inserted into the VLAN
tag for signaling frames (SIP). All other frames
except those specified by the L2QAUD
parameter are set to priority 0.
Valid values are 0 through 7.
Table continues…
Virtual LAN (VLAN) overview
December 2018 Installing and Administering Avaya J100 Series IP Phones 121
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English