Parameter name Default
value
Description
SSH_IDLE_TIMEOUT 10 Specifies the idle time in minutes
after which an SSH connection is
terminated
Valid values are 0 through 32767.
A value of 0 means that the
connection will not be terminated.
SUBSCRIBE_LIST_NON_AVAYA Specifies comma separated list of
event packages to subscribe to
after registration.
Possible values are: reg, dialog,
mwi, ccs, message-summary which
is identical to mwi, avaya-ccs-
profile which is identical to ccs. The
values are case insensitive.
For IPO the recommended value
shall be reg, message-summary,
avaya-ccs-profile.
SUBSCRIBE_SECURITY Specifies the use of SIP or SIPS for
subscriptions.
Value Operation:
• 0: The phone uses SIP for both
the request URI and the
contactheader regardless of
whether SRTP is enabled.
• 1: The phone uses SIPS for both
the request URI and the contact
header if SRTP is enabled. TLS is
on and MEDIAENCRYPTION has
at least one valid crypto suite.
• 2: SES or PPM does not show a
FS-phoneData FeatureName with
a Feature Version of 2 in the
response to the
getHomeCapabilities request.
For IP office environment, the
applicable values are 0 and 1.
SYMMETRIC_RTP 1 Specifies if the phone must discard
received RTP or SRTP datagrams if
their UDP source port number is
not the same as the UDP
destination port number included in
Table continues…
List of configuration parameters
December 2018 Installing and Administering Avaya J100 Series IP Phones 265
Comments on this document? infodev@avaya.com
To Next Page
Loading...
Need help?
General
