Avaya JEM24 Installing

Name Description
• Disable (default)
SNMP
SNMP String Specifies the SNMP community name string.
The valid value is a string of up to 32 ASCII characters. The default
value is empty.
SNMP Address Specifies the IP addresses for SNMP queries.
The valid value is a string of up to 255 ASCII characters without any
intervening spaces.
The default value is empty.
RTCP Monitoring
RTCP Monitor Address Specifies the IP or DNS address of the RTCP monitor.
The valid value is a string of up to 255 ASCII characters. The default
value is empty.
RTCP Monitor Port Specifies the RTCP monitor port number.
Valid value is an integer from 0 to 65535. The default value is 5005.
RTCP Monitoring Report
Period
Specifies the time interval in seconds for sending out RTCP monitoring
reports.
Valid value is an integer from 5 to 30. The default value is 5 seconds.
Phone Report
Phone Report Server Address Specifies the file server address to send the phone report. Click on
Generate Phone Report.
The valid value is a string of up to 255 ASCII characters.
SSH
SSH Allowed Specifies whether Secure Shell (SSH) is supported.
The options are:
• Enable
• Disable (default)
• Configured using local craft procedure
SSH Idle Timeout Specifies the time in minutes after which SSH is disabled.
The valid value is an integer from 1 to 32767. The default value is 10
minutes.
SSH Banner File Specifies the file name or the URL for a custom SSH banner file.
The valid value is a string of up to 255 ASCII characters. The default
value is empty.
Table continues…
Configuring the phone using web interface
December 2018 Installing and Administering Avaya J100 Series IP Phones 86
Comments on this document? infodev@avaya.com

Avaya JEM24 Specifications

General

Brand	Avaya
Model	JEM24
Category	IP Phone
Language	English