Installing under Windows
AX3000 Models 80 and 85 - User's Manual 99
- Detected Type (only with local authentication): this parameter, also known as "smooth
roaming", allows a user to retrieve his former sessions from another workstation. The types
can be "disconnected" or "disconnected and active". If a former connection is retrieved,
the 'Auto-Reconnection' option allows it to be run.
- Dynamic Session Label: a session label is displayed in the thin client taskbar and the local
desktop. Two options:
- General Label: this is the label set in the 'Connection Properties' Box.
- User Name: this is the user name after authentication.
- Seamless Mode for Applications: With the seamless mode, a part of the windowing is
handled by the thin client itself, and the true icon of the program is displayed in the Axel
taskbar.
- Use Alternate Address (only for Citrix 'TCP/IP + HTTP'): set it to 'Yes' when a firewall is
present. See CTX039746 in Citrix Knowledge Base
5.2.3 - 'Session Parameters' Section
This is a part of the dialog box:
Set the following parameters:
- Display Parameters: display settings (resolution and colors). See Chapter 5.2.6.
- Additional Parameters: a dialog box, which lets certain ICA parameters be changed. See
Chapter 5.2.7.
- Redirected Resources: set redirected resources (printers, COM ports, etc.). See Chapter
5.2.8.
- Bandwidth: a dialog box which lets certain parameters be changed. See Chapter 5.2.9.
5.2.4 - Connection Properties
The following box is displayed:
These parameters are:
- Auto-Connection: if this parameter is set to 'yes', the connection will be automatically
established when the AX3000 is powered. Otherwise, the user can press <Alt><Fx> to
establish the connection.
- Auto-Reconnection: if this parameter is set to 'yes', a new connection is automatically
established after a disconnection. Otherwise, the user can press <Alt><Fx> to establish a
new connection.
- Session Label: this character string (11 characters max.) is used to identify the session
within the local desktop or in the taskbar.
- Enhanced parameters: see Appendix A.7.3.