Axel AX3000 80 User Manual

Installing under Windows
AX3000 Models 80 and 85 - User's Manual 107
The following dialog box is displayed:
To enable setting options set 'Activation' to 'Yes'
5.3.2 - 'Connection Parameters' Section
This is a part of the dialog box:
a) Exploration Protocol and Server
The 'Exploration Protocol' option is available only for the Citrix Receiver Desktop (see Chapter
5.2.1). Possible values are:
- StoreFront: access to XenApp/XenDesktop.
- WEB Interface: access to a WEB Interface server with a PNAgent site
- TCP/IP + HTTP: access to a server of the farm (XML port is needed).
Citrix StoreFront or Citrix WEB Interface or Microsoft RemoteApp
Server URL: syntax is [https://]server[:port][/config].
- https: optional use (default: http)
- server: DNS name of IP address of WEB Interface server
- port: optional TCP port (default: 80 for http and 443 for https)
- /config: optional configuration full pathname. Default is:
- Left blank for Citrix StoreFront
- "/Citrix/PNAgent/config.xml" for Citrix WEB Interface
- Left blank or "rdweb/feed/webfeed.aspx" for RemoteApp
Citrix TCP/IP+HTTP
Server and XML Port: syntax is server[:port]
- server: DNS name of IP address of one Citrix server

Axel AX3000 80 Specifications

General

Brand	Axel
Model	AX3000 80
Category	Server
Language	English