Installing under Windows
88 AX3000 Models 80 and 85 - User's Manual
- Local Authentication: enabling this parameter allows authentication information to be
entered before the RDP connection is established. This can be useful with a 'Connection
broker'. The authentication can be either a username or a pin code (if smartcard redirection
is enabled). The possible values for this parameter are: "no", "yes" (username or pin code) or
"Yes, Smartcard Only".
- Auto Run: the program can be launched in normal mode or in seamless mode. (With the
seamless mode, a part of the windowing is handled by the thin client itself, and the true icon
of the program is displayed in the Axel taskbar).
- Command: the program path and file name of the program to be launched.
Example: %SystemRoot%\system32\cmd.exe
- Working Directory: sets program working directory.
Example: D:\
5.1.4 - Display Parameters
The following box is displayed:
This box allows display settings (resolution, number of colors and frequency) to be set. The
availability of these parameters depends of the Type value:
- Default: these three parameters are issued from general settings (see Chapter 3.2.2). When
general settings are modified, these three parameters are automatically updated with new
values.
- Customized: the three parameters are independent from general settings.
The 'Dual Monitor' option allows this mode to be set-up for this session. For more information,
please refer to Chapter 3.2.2 and Appendix A.6.
Note: the 'Dual Monitor' option is disabled when a TS Gateway is used.
To Next Page
Loading...
Need help?
General
