Axel AX3000 80 User Manual

Initial Power-On
AX3000 Models 80 and 85 - User's Manual 13
2.1.3 - Network Connection
The Network dialog box is shown below:
The parameters are:
- Enable DHCP: two options:
- Yes: the DHCP protocol is run when the set-up is exited and the thin client
automatically obtains an IP address and various other DHCP options (netmask,
default router, etc).
- No: a Static IP address is required
- IP address: mandatory if DHCP is disabled.
- Default router: optional router IP address.
- 1st DNS Server IP Address: optional DNS server IP address
For more information about DHCP and DNS, please refer to appendices A.3 and A.4.
2.1.4 - Session Profile
This box allows the environment to be selected. This is done through the 'Session Type' and
'Connection Type' fields.
a) Microsoft TSE/RDS - RemoteApp Desktop
The RemoteApp desktop allows, after authentication, published application icons to be displayed
on the thin client’s local desktop. RDP sessions will be created dynamically:
These parameters are:
- Connection Speed: network type selected trough a list.
- Server URL: syntax is [https://]server[:port][/config].
- https: optional use (default: http)
- server: DNS name of IP address of RemoteApp server
- port: optional TCP port (default: 80 for http and 443 for https)
- /config: optional configuration full pathname (default is "/rdweb/feed/webfeed.aspx")

Axel AX3000 80 Specifications

General

Brand	Axel
Model	AX3000 80
Category	Server
Language	English