Installing under Windows
110 AX3000 Models 80 and 85 - User's Manual
5.3.3 - 'Session Parameters' Section
This is a part of the dialog box:
These parameters are:
- Number of Sessions: this sets the number of sessions reserved for published applications.
- Dual Monitor: set yes/no.
The following parameters are used dynamically by RDP/ICA to set up the published
applications.
- Additional Parameters: see Chapter 5.1.5 for RDP and 5.2.7 for ICA.
- Redirected Resources: see Chapter 5.1.6 for RDP and 5.2.8 for ICA..
- Performances or Bandwidth: see Chapter 5.1.7 for RDP and 5.2.9 for ICA.
Notes:
- After changing setup parameters it is necessary to reboot the thin client to ensure the new
values are used.
- Once "Application Desktop" is setup the reserved sessions are inaccessible from the setup
menus.
- The setting up of an "Application Desktop" activates the taskbar allowing sessions to be
changed with the mouse.
5.4 - VMWARE VIEW CLIENT SESSION
A VMware View Client session lets the thin client to be connected VMware Desktop Virtualization
environments.