Axel AX3000 80 User Manual

Installing under UNIX/LINUX
150 AX3000 Models 80 and 85 - User's Manual
This chapter covers AX3000 installation under Unix/Linux.
8.1 - TEXT MODE SESSION (TCP/IP OR SERIAL MODE)
8.1.1 - Setting a Session Profile
To set the profile of a session, enter the AX3000 Set-Up and select the [Configuration]-
[Sessions]-[Session X] menu (where X is the session number to be configured). The following
box is displayed:
These parameters are:
- Session Type: select 'Text Emulations'.
- Emulation: see Chapter 8.1.3
- Protocol: select 'telnet', 'tty', 'ssh2' or 'serial'. (See Chapter 8.1.2)
- Server: selected from the server table (see Chapter 3.1.4). A new server can be added by
selecting 'IP address' or 'Server Name'.
- Connection Properties: see Chapter 8.1.8
- Display Parameters: see Chapter 8.1.4.
- Additional Parameters: allows certain emulation parameters to be changed. (See Chapter
8.1.5)
- Editing Keyboard table: allows certain keys to be remapped. (See Chapter 8.1.5)
- Key Mapping: allows all of the keys to be remapped. (See Chapter 8.1.5)
- Coloring mode: allows monochrome applications to be displayed in color. (See Chapter
8.1.6)
- Palette: lets colors to be remapped. (See Chapter 8.1.5)
8.1.2 - Protocols: telnet, tty, ssh, ssh2 or aux1/aux2
Connecting a character based session can be done:
- Either in TCP/IP mode via telnet, tty or ssh2 protocols

Axel AX3000 80 Specifications

General

Brand	Axel
Model	AX3000 80
Category	Server
Language	English