Installing under Windows
AX3000 Models 80 and 85 - User's Manual 109
d) Desktop Parameters
The following dialog box is displayed:
Displaying Resources: these options are used for enumerating resources:
- Filter: Description must contain (only for Citrix): this allows displaying only published
resources with a description field including the entered character string.
- Number of Rows for App. Names: set the number of lines for text (1 to 5) displayed below
the application icon, for long names.
- Resource Filter: allows Desktops and/or Applications to be enumerated.
- Resource Display Mode: when 'Resource Filter' is 'Desktop and Application', this option
selects if all resources are displayed at the same level or in two separate folders.
Launching Resource: these options are used for launching the resource:
- Auto-Exec Single Resource: if only one resource is published, this option runs it
automatically.
- Automatic Session Reconnection (only for Citrix and if the previous option is disabled):
this parameter, also known as "smooth roaming", allows a user to retrieve his former
sessions from another workstation. The reconnected session type can be "disconnected" or
"disconnected and active".
- Force one resource per session: with this option a new RDP/ICA session will be created to
run each published application. If not set the thin client will try to re-use an existing RDP/ICA
session to run a published application, assuming the second application resides on the same
server as the first application.
Note: “Published Desktops” are always started in a new session
- Dynamic Session Label: a session label is displayed in the thin client taskbar. Four options:
- General Label: this is the label set in the 'Connection Properties' Box.
- First Application Label: this is the name of the first application launched on this session.
- Last Application Label: this is the name of the last application launched on this session.
- Server Name: this is the DNS name or the IP address or the name in the thin client server
table.
- Use Alternate Address (only for Citrix TCP/IP +HTTP): set it to 'Yes' when a firewall is
present. See CTX039746 in Citrix Knowledge Base
To Next Page
Loading...
Need help?
General
