Axel AX3000 80 User Manual

Initial Power-On
AX3000 Models 80 and 85 - User's Manual 19
2.1.6 - Devices
This box is displayed for the all session types:
These parameters are:
- Printer Connected: auxiliary port where printer is attached (none, aux1, aux2, parallel,
USB1).
- Protocol: LPD, TSE, Prt5250 or Prt3270. The next parameters are protocol-dependent:
- LPD: Queue Name (name given to the auxiliary port)
- TSE: Printer Name and Windows TSE Driver
- Prt5250: Printer Name and Driver (printer type and model)
- Prt3270: Printer Name
- Access Permission: only for Microsoft TSE/RDS and Citrix Receiver sessions where USB
Mass Storage is supported.
2.1.7 - Set-Up Summary
At the end of the wizard process, a summary of the selected settings is displayed. For example:
Press the [OK] button to accept and use these settings. After an automatic reboot the thin client is
ready to be used.
The [Advanced Setup] button enters the interactive setup where further configuring is possible. For
example adding different session types.

Axel AX3000 80 Specifications

General

Brand	Axel
Model	AX3000 80
Category	Server
Language	English