Axel AX3000 80 User Manual

Tools and Statistics
172 AX3000 Models 80 and 85 - User's Manual
9.2.2 - With bootp/tftp Protocols
Select the [Upgrade]-[Firmware]-[Update from Network] menu from the AX3000 set-up. The
following box is displayed:
Firmware can be updated in one of two ways:
- tftp protocol: the operator must enter the location of the firmware file.
- bootp and tftp protocol: this is an automatic procedure. The necessary parameters will
already be available from a bootp server.
Note: AxRM can act as a bootp/tftp server
IMPORTANT: the thin client will automatically reboot to perform this operation.
9.3 - THE PING COMMAND
The ping command is used to check for the presence of a live TPC/IP device. Select the
[Diagnostics]-[Ping] dialog from the AX3000 set-up, then select the server name from the list or
enter the IP address or the DNS name of the server.
9.4 - CONNECTION MANAGEMENT
Connection failures are often caused by incorrect settings.

Axel AX3000 80 Specifications

General

Brand	Axel
Model	AX3000 80
Category	Server
Language	English