Axel AX3000 80 User Manual

Installing under Windows
102 AX3000 Models 80 and 85 - User's Manual
- <Ctrl><Alt><Del>: the two modes for this keystroke are:
- Local: the keystroke is handled by the AX3000 and is used for shutdown the thin client
(see Chapter 4.9)
- Remote: the keystroke is handled by the Windows server (for example opening the
task manager).
- <Scroll Lock> & <Pause>: enable or disable these two keys
5.2.8 - Redirected Resources
The redirected resources mechanism allows one or more local resources to be 'published' to the
Windows server. These resources are available only for the thin client's user. They are created on
the Windows server when the connection is established and removed when the session is
disconnected.
The following local resources are supported:
- Printers: before being redirected each printer must be declared at the 'physical connection
port' level. See first sub-section a) then c).
- COM/LPT ports before being redirected each port must be declared at the physical port
level. See first sub-section b) then c) and d).
- Mass storage devices: see sub-section c).
- Smartcard readers: see sub-section c)
- Audio: see sub-section c)
a) Declaring a Redirected Printer
At the RDP/ICA connection time a redirected printer will be automatically added to the Windows
spooler. It will be removed when the session disconnects.
Before being redirected an RDP/ICA printer must be declared at the 'physical connection port' level.
The available ports are: auxiliary ports (parallel, Aux1 and Aux2), USB logical ports and network
printers.
Select the dialog box of the 'Printer port' (menu [Configuration]-[Ports]-[xxx]). For example, the
Aux1 port:
Set the 'Active' parameter to 'As Printer' or 'As Printer and COM'. Then select 'Printer Parameters'.

Axel AX3000 80 Specifications

General

Brand	Axel
Model	AX3000 80
Category	Server
Language	English