Axel AX3000 80 User Manual

Interactive Set-Up
AX3000 Models 80 and 85 - User's Manual 29
- The target type: server or network (in this last case, a netmask allows sub-netting)
d) 802.1X Security
The 802.1X protocol is an authentication mechanism for terminals on a LAN requiring a password
or certificate for authentication.
Note: A dedicated authentication server (radius) is needed.
Activate the 802.1X Security option and enter the 'Settings' box:
The following table describes the parameters of each authentication mode:
Authentication
Mode
Username and
Password
CA
Certificate
Personal
Certificate
LEAP
required
---
---
PEAP
(MS-CHAP v2)
required
optional
optional
EAP-TLS
---
optional
required
3.1.3 - Wireless Interface
To set the Wireless interface properties select the [Configuration]-[Network]-[Wireless Interface]
menu. The two sub-menus are:
- [Wireless Parameters]: see next page.
- [IP Parameters]: same dialog box as Ethernet interface (minus the 'Link' parameter)
The [Wireless Parameters] box is shown below:
This box allows the wireless profile to be set-up (only one profile)

Axel AX3000 80 Specifications

General

Brand	Axel
Model	AX3000 80
Category	Server
Language	English