Axel AX3000 80 User Manual

Remote Administration
AX3000 Models 80 and 85 - User's Manual 181
- Obtaining set-up configuration
- Rebooting the peripheral
- Remotely configuring a peripheral
- Downloading firmware,
- Entering the interactive set-up via a telnet client.
It is also possible:
- To build and manage a thin client database,
- To compile a list (batch) of commands to run consecutively,
- To download a firmware though BOOTP,
- To set IP addresses by using the device MAC address.
- Repair thin clients that have lost their firmware (bootp error)
For more information about the AxRM utility, read the manual "Axel Remote Management".
10.2 - REMOTE CONTROL
This functionality allows an administrator to remotely take control of a thin client. The administrator
can passively watch the users screen or actively take control with his own keyboard for various
support or administration purposes.
Note: the remote control function must be enabled on the thin client (see below)
To set-up the remote control function, select the menu [Configuration]-[Terminal]-[Remote
Control]. For more information, please refer to Chapter 3.2.7.
Use AxRM to take the control of the thin client. See Chapter 10.1.
10.3 - INTERACTIVE TELNET SET-UP
The AX3000 interactive set-up can be accessed through a telnet session. A specific TCP port is
used.
The default value of this TCP port is 4096. This value can be changed. See Chapter 3.2.7.
We strongly advise using AxRM to open the telnet setup (see Chapter 10.1). But any telnet client
could be used with the correct arguments as below
- ANSI emulation (with color support)
- TERM value: ansi
- Screen size: 80x25
- Scrolling mode disabled
Notes:
- To disable the telnet set-up, set the TCP port to 0.
- When the telnet set-up is running, the set-up is also displayed on the target thin client. The
keyboard of the target thin client is locked.
- The AX3000 telnet server supports the keepalive mechanism (value 3 minutes). In event of
network incident, the set-up will be automatically ended and the keyboard of the target thin
client will be unlocked.

Axel AX3000 80 Specifications

General

Brand	Axel
Model	AX3000 80
Category	Server
Language	English