Axel AX3000 80 User Manual

Installing under OS/400
AX3000 Models 80 and 85 - User's Manual 119
These parameters are:
- Session Type: select "5250"
- Server: selected from the server table (see Chapter 3.1.4). A new server can be added by
selecting 'IP address' or 'Server Name'.
- Connection Properties: see Chapter 6.1.6.
- Authentication: Auto-Signon function. See Chapter 6.1.5.
- Terminal Name (DEVNAME): if this name is left blank, the OS/400 will associate a dynamic
name to this session (i.e.: QPADEV001).
- Display Parameters: for more information, see the next chapter.
- Additional Parameters: lets certain emulation parameters to be changed. See Chapter
6.1.5.
- Key Mapping: lets any keys to be remapped. See Chapter 6.1.5.
- Palette: lets emulation colors to be remapped. See Chapter 6.1.5
6.1.3 - Display Parameters
The following box is displayed:
These parameters are:
- Resolution: For information only. This is the current resolution selected in the
[Configuration]-[Terminal]-[Screen] menu.
- Full Screen: two possible values:
- 'Yes': the session is displayed on the entire screen and the character size is automatically
adapted to the resolution and the number of lines/columns.
- 'No': the session is displayed in a 'Window' mode and the character size can be
customized.
- Character Size (Only when 'Full Screen' is disabled): Two possible values: 'standard' (8x16)
or 'double' (16x32).
Note: for more information, please refer to Appendix A.7.5.

Axel AX3000 80 Specifications

General

Brand	Axel
Model	AX3000 80
Category	Server
Language	English