Axel AX3000 80 User Manual

Interactive Set-Up
26 AX3000 Models 80 and 85 - User's Manual
Registering an entry with the DNS server requires an FQDN. (Fully Qualified Domain Name) If the
"DNS Domain" parameter is empty, the "Default DNS Domain" (supplied by the DHCP server) will
be used. If "Default DNS Domain" is empty, the name won't be registered.
The name registration can be performed by the DHCP server or by the thin client itself. For more
information see the next chapter and the appendix A.4.3.
b) Active Interface
This parameter selects which interface to be used. Possible values are:
- Ethernet
- Wireless
- None (serial mode)
c) The Thin client Comment
This character string allows a thin client description to be entered. This description will be obtained
by the Axel Remote Management software (AxRM) during the 'discover' operation. This comment
will allow the thin client to be easily located within the database.
3.1.2 - Ethernet Interface
To set the Ethernet interface properties select the [Configuration]-[Network]-[Ethernet
Interface]-[IP Parameters] menu. The dialog box below is displayed:
The "Link" parameter is set by default as auto-sense. Available modes are:
- Auto-sense,
- 10BT HalfDuplex,
- 10BT FullDuplex,
- 100BT HalfDuplex,
- 100BT FullDuplex.
The next sub-chapters deal with:
- The interface setting (static or dynamic IP address),
- The DNS protocol,
- The router management,

Axel AX3000 80 Specifications

General

Brand	Axel
Model	AX3000 80
Category	Server
Language	English